best reviews metal detectors for gold
Interesting information about treasure hunters
How to set up the Minelab X-Terra 705
A high-quality metal detector can not give a full guarantee of effective search, because you still need to be able to use it correctly. Of course, there are inexpensive primitive detectors that respond to any metal objects indiscriminately, which do not need to be adjusted, just to turn on. But in most cases, the result of such a search will be only garbage, and the purpose of metal search is a valuable find. In order to make the most of the search technique, it needs to be properly configured.
Minelab X-Terra 705 is one of the best representatives of quality metal detectors for the search for coins, relics and gold jewelry. In addition to its high reliability and durability, its main advantage is the ability to change the working frequency, by choosing one of three options - 3 kHz, 7.5 kHz or 18 kHz, but with the obligatory use of a coil with the same frequency. The depth of detection and sensitivity to search targets will depend on the frequency chosen. The smaller the parameter, the deeper the metal detector sees and the larger the target, the highest frequency of 18 kHz gives maximum sensitivity to small targets lying a short distance from the ground.

The Minelab X-Terra 705 metal detector has a sound display and a multi-ton mode of 28 sounds, with the option to select and customize individual settings. To search at the maximum depth of a single tone, when the probability of hearing even the weakest signal from a deep target is important. For the best separation of goals, it is advisable to choose polyphony, but the abundance of sounds will have to get used to for a while. For an effective search, you can not ignore such an important parameter as the threshold tone, and it is better to adjust it immediately after the device is turned on. Optimally, it should be slightly above the weakest sound in the background, with small objects that will not be visible on the monitor can be calculated as pauses between the buzzing threshold tone.

Another feature of the Minelab X-Terra 705 metal detector is the presence of a exploration regime used in gold mining. Its characteristic feature is the highest sensitivity. This mode can be used in the beach search for small jewelry, especially for items of complex configuration, such as gold and silver chains. Pinpoint mode, which is also present in the device, will help determine the exact location of the target. In general, the management of Minelab X-Terra 705 is intuitive and can be mastered even by a user with little experience.
.
Minelab Go-Find 40 Depth Test and Field Test Review
Minelab GO-FIND 40 - The modern design of this model allows you to work efficiently and quickly. Due to the special design of the rod […]
setup minelab xterra 705 Coin All metal mode settings Review
Minelab X-Terra 705 - The flagship in the X-Terra metal detector line. The detector is equipped with a 10.5″ DD coil with a frequency of…[…]
setting up Minelab Safari for different situations review
Minelab Safari - The metal detector uses advanced FBS technology: the coil works at 28 frequencies from 1.5 to 100 kHz at the same time […]
Minelab CTX 3030 Amazing Machine unbox the beast assemble review
Minelab CTX3030 - Minelab’s flagship will be useful to an experienced seeker looking for treasures on land or in the water. The model will withstand […]