best reviews metal detectors for gold
Interesting information about treasure hunters
How to use a metal detector
Having made the purchase of the cherished device, you need to properly familiarize yourself with the manual of operation provided by the manufacturer. Do not be dismissive of this guide, fluently running only the main sections with design features and management functions. The document outlines usage recommendations, frequent problems, and how to address them. Having carefully studied the instructions, it will be much easier for you to understand how to use a metal detector.

Assembling a metal detector



Before you assemble a metal detector. check the availability of all parts of the device specified by the manufacturer. If you don't have some parts (coil, barbells, washers) contact the seller. Depending on the model, metal detectors can be assembled in different schemes. Consider the Build on the example of Garrett Ace 250 - it is a very popular and common model, a favorite of both beginners and professionals.

Remove the paper pad from the stop pershards and insert them into the bottom bar, then attach the coil to the barbell.

There are holes in the search coil, they need to insert a bolt, then manually tighten two flywheels.

Take the top barand and insert it into the bottom bar, insert the resulting design into the control panel frame by pressing two buttons and connecting the body knot with the barbell. Adjust the length of the collected node.

Wrap the wire of the coil around the barbell, and the first round should be made on top of the barbell.

Insert the cable plug into the case connector and tighten manually.
Push the battery lid back and install the batteries if they are not available.
Adjust the elbow support by sturning the screw on the bottom of the armrest and turning the cuff.
As you can see, there is nothing complicated in assembling a metal detector, it remains only to learn how to use it.

Set up a metal detector



Again, let's go back to the user's manual, which details all the capabilities and specifications of the metal detector. To start with, it's a good idea to try out these options at home. You will need small and medium-sized non-ferrous metal items. It can be a product of gold, copper coin, aluminum foil (such for sure there is in the kitchen), zinc nail.

Set up the device to the lowest level of sensitivity and zero discrimination. Now swipe metal objects in front of the coil at a distance of about 10-15 cm, while keeping an eye on the readings on the display and the tonality of the sound. If you have already studied information on how to use a metal detector, you know that the higher the tone, the more likely you are to find valuable coins made of silver, copper and brass; Low tone means a small find of gold or nickel, the middle tone is the tongues and corks from aluminum cans. If you intend to look for gold, you should know: often jewelry is found on low and medium tonality, so do not immediately exclude from the search unnecessary segments of discrimination. First, you need to properly study the device.

Do some of these tests with objects from different metals, alternately adjusting the metal detector to different modes of discrimination. This simple way will help you gain the initial experience of using a metal detector.

Metal detector tests in the field



Before you go in search, you should adjust the device to your height by adjusting the barbell. Usually it has a lot of small holes with which the detector takes the length that you need. Drive a metal detector a short distance from the ground - you should not feel tired for a few minutes, if this happened, you should choose a more relaxed position of hands and body.

If your device has a ground balance, you should include this feature. The fact is that the soil contains a large number of minerals, salts, which are able to emit false signals. In order not to be disappointed by such interference on the first day of the cop, you need to make a deleting from the ground, and if you work next to power lines or other metal detectors, then also the adjustment from electrical interference.

Before you try different functions with delight, you need to duplicate home tests by air in real-world conditions. Bury items from your set to a depth of 30 cm, you can bury one object several times at different depths. At the same time it is desirable to remove a whole lump of soil with a shovel, to lay there a metal object and carefully cover with a lump of earth. So you will have much less interference, because the conditions in this case are as close as possible to the real. After all, valuable finds often lie not in loose ground, and in a sticky piece of soil. Write down all the readings in the notebook - purpose, depth, readings of the device and tone.
simple metal detector with your own hands
If your metal detector has pinpoint target location mode, it's a good idea to try out its capabilities. Bring the coil as close as possible to the target and notice where the signal from the device will be the strongest. After spending a little time on field tests, you will quickly understand how to use a metal detector.

The behavior of the novice user when searching is always different - it is characterized by sharp swings of the coil to the sides, down and up. It's wrong to learn to own a metal detector from the beginning. The coil moves smoothly, without sharp swings, at the same distance from the ground. Remember: the closer the coil is to the ground, the deeper the metal detector can see.

Change the settings of the device and watch the readings on the display - how it determines the type of find at low or high sensitivity. At a low level of sensitivity it is good to look for deep-lying targets, and on a high perfectly detect small targets lying on the surface. Check your detector's capabilities. After a few preliminary tests, you will not only understand how to use the metal detector, but also begin to "feel" it, which is the most important moment in the treasure hunt.