How to set up the Minelab X-Terra 705

Setting up the Minelab X-Terra 705 metal detector involves several steps to ensure optimal performance. Here’s a guide to help you get started:

1. Assemble the Detector

Connect the Shaft: Slide the lower shaft into the upper shaft and secure it with the locking mechanism.

Attach the Search Coil: Connect the search coil to the lower shaft and secure it with a bolt and nut.

Plug in the Coil Cable: Insert the coil connector into the control box and tighten it to ensure a secure connection.

Read more about: Depth of detection test Minelab X-Terra 705

2. Install Batteries

Open the Battery Compartment: Use a screwdriver if necessary to open the compartment.

Insert Batteries: Place the batteries (typically 4 AA) in the correct orientation, following the polarity indicators.

Close the Compartment: Securely close the battery compartment.

3. Turn On the Detector

Power On: Press and hold the power button until the display lights up.

4. Select a Search Mode

Choose a Mode: Use the Mode button to cycle through available modes (e.g., Coin, Treasure, Relic).

Adjust Settings: You can modify settings like discrimination, sensitivity, and volume using the appropriate buttons.

Read more about: Minelab X-Terra 705 DD 10.5 Metal Detector

5. Set Up Sensitivity

Adjust Sensitivity: Start with a mid-range sensitivity setting. Increase it gradually based on the ground conditions and your comfort level.

6. Ground Balance

Manual Ground Balance: Find a clean patch of ground and press the Ground Balance button. Hold the detector still, then adjust until you achieve a balance.

Automatic Ground Balance: Alternatively, use the auto ground balance feature if available.

7. Test the Detector

Air Test: Use known metal objects to test the detector's response. This helps you understand how it signals different metals.

8. Start Detecting

Begin Searching: Sweep the detector slowly in front of you, keeping the search coil parallel to the ground.

Listen for Signals: Pay attention to audio signals and visual indicators on the display.

Read more about: minelab x-terra 705 metal detector gold

9. Fine-Tune Settings

Adjust as Needed: As you detect, feel free to adjust sensitivity and discrimination settings based on the terrain and finds.

Tips

Practice: Spend time practicing in different environments to become familiar with the detector's sounds and signals.

Consult the Manual: Refer to the user manual for detailed features and advanced settings.

With these steps, you'll be ready to start your metal detecting adventures with the Minelab X-Terra 705!

A high-quality metal detector can not give a full guarantee of effective search, because you still need to be able to use it correctly. Of course, there are inexpensive primitive detectors that respond to any metal objects indiscriminately, which do not need to be adjusted, just to turn on. But in most cases, the result of such a search will be only garbage, and the purpose of metal search is a valuable find. In order to make the most of the search technique, it needs to be properly configured.

Minelab X-Terra 705 is one of the best representatives of quality metal detectors for the search for coins, relics and gold jewelry. In addition to its high reliability and durability, its main advantage is the ability to change the working frequency, by choosing one of three options – 3 kHz, 7.5 kHz or 18 kHz, but with the obligatory use of a coil with the same frequency. The depth of detection and sensitivity to search targets will depend on the frequency chosen. The smaller the parameter, the deeper the metal detector sees and the larger the target, the highest frequency of 18 kHz gives maximum sensitivity to small targets lying a short distance from the ground.

The Minelab X-Terra 705 metal detector has a sound display and a multi-ton mode of 28 sounds, with the option to select and customize individual settings. To search at the maximum depth of a single tone, when the probability of hearing even the weakest signal from a deep target is important. For the best separation of goals, it is advisable to choose polyphony, but the abundance of sounds will have to get used to for a while. For an effective search, you can not ignore such an important parameter as the threshold tone, and it is better to adjust it immediately after the device is turned on. Optimally, it should be slightly above the weakest sound in the background, with small objects that will not be visible on the monitor can be calculated as pauses between the buzzing threshold tone.

Another feature of the Minelab X-Terra 705 metal detector is the presence of a exploration regime used in gold mining. Its characteristic feature is the highest sensitivity. This mode can be used in the beach search for small jewelry, especially for items of complex configuration, such as gold and silver chains. Pinpoint mode, which is also present in the device, will help determine the exact location of the target. In general, the management of Minelab X-Terra 705 is intuitive and can be mastered even by a user with little experience.