Gold and Silver found on Oak Island

 The Minelab Safari offers versatile settings for different situations, making it suitable for various types of treasure hunting including coin, jewelry, relic, and beach detecting. It features four pre-programmed detection modes—Coin, Coin/Jewelry, Relic, and All Metal—each optimized for different target types and environments.

General Setup Tips

The detector uses Full Band Spectrum (FBS) technology that scans multiple frequencies simultaneously (1.5 kHz to 100 kHz), helping it perform well on diverse soil types including highly mineralized soils and saltwater beaches.

Read Also :  Garrett AT Pro vs Minelab Safari

The device offers both automatic and manual ground balancing to adapt to different soil conditions.

Noise Cancel function helps select the quietest frequency channel for stable operation in areas with electromagnetic interference.

Sensitivity can be adjusted in 21 levels, allowing customization for deep searching or reducing false signals in trashy areas.

The detector has a Target ID number ranging from -10 to +40, combined with audio tones and visual cues to discriminate between different metals.

Read Also :  Gold test Nokta Simplex vs XP Deus and Minelab Safari

Settings for Specific Situations

Beach Detecting:

• Use Coin/Jewelry or Relic mode for better discrimination of valuable targets against trash.
• Ensure automatic or manual ground balance is properly set to counteract saline and mineralized ground effects.
• Use Noise Cancel frequently to find a stable frequency channel, especially near power lines or crowded areas.
• Adjust sensitivity moderately to avoid false signals from wet sand and salt.

Field or Park Detecting:

• Coin or All Metal mode is recommended depending on the environment’s trash density.
• Manual ground balancing may be preferable here to fine-tune for particular soil mineralization.
• Use the Notch filter to reject common undesired metals.
• Sensitivity setting can be higher to detect deeper and smaller objects.

Read Also : Metal Detecting With The Minelab Safari

High Trash Density Areas:

1. Use High Trash Density setting to improve target recovery and better separate signals from closely spaced objects.
2. Accept and Reject buttons allow quick on-the-fly discrimination adjustments.

Recommended User Practices

1. Slow and steady swinging for better target detection and separation.
2. Use the Pinpoint feature to accurately locate targets once detected.
3. Learn to interpret the discrimination pattern and target IDs for efficient hunting.
4. Reset to factory settings if unsure, then customize after gaining experience.

The Minelab Safari is praised for its ease of use paired with advanced features that suit both beginners and experienced hunters. Its FBS technology and multiple search modes provide great flexibility for different detecting conditions, from beaches to parks and relic sites. Proper use of ground balance, noise cancel, and sensitivity controls is key to optimizing performance in each specific situation

Minelab Safari – The metal detector uses advanced FBS technology: the coil works at 28 frequencies from 1.5 to 100 kHz at the same time. It makes it much easier to find small and large objects at any depth. The Double-D 11″ coil is not afraid of immersion in water. The weight of the device is 1.8 kilograms, the rod is adjustable for a length of 110 to 140 centimeters.

Minelab Safari is efficient and easy to manage. There are four modes of operation: All Metal, Coins for coins, Jewelry for Jewelry and Relics for Artifacts. The detector allows you to regulate discrimination, sensitivity, volume of sound, threshold tone. The rearrangement from the ground and electrical interference is automatic. Pin-Point informs about the location of the find by sound and image on the screen. Target ID will help determine the value of the object you found.

The screen is unlit. Displays the current mode of operation, discrimination options, Target ID, depth of find, battery charge. You can connect the headphones through the 1/4″ connector. Minelab Safari voracious: powered by eight AA batteries, which are enough for 8 hours of operation.

Setting up the Minelab Safari metal detector for various situations involves adjusting its features to optimize performance based on the environment and target types. Here’s a review of how to effectively configure the Safari for different detecting scenarios:

Overview of the Minelab Safari

The Minelab Safari is a mid-range metal detector known for its versatility and user-friendly features. It offers multiple search modes, customizable settings, and excellent target identification capabilities.

Key Settings to Adjust

Search Modes

Coin Mode: Ideal for parks and urban areas where coins are the primary target. This mode emphasizes coin detection and provides good discrimination against trash.

Treasure Mode: Suitable for relic hunting and treasure recovery, focusing on a broader range of metal types.

All Metals Mode: Use this mode in highly mineralized soils or when searching for gold nuggets. It detects all metals but may produce more noise from unwanted targets.

Sensitivity Settings

Adjust Sensitivity: Increase sensitivity when searching in areas with fewer targets or in open spaces. Decrease sensitivity in trashy areas or highly mineralized soils to minimize false signals and improve target accuracy.

Ground Balance

Manual Ground Balance: Adjust the ground balance to compensate for mineralization in the soil. This is crucial in areas with high mineral content, such as beaches or old mining sites.

Auto Ground Balance: In stable ground conditions, use the automatic ground balance feature for ease of use.

Discrimination Settings

Set Discrimination Levels: Adjust the discrimination to filter out unwanted metals, such as iron or aluminum, especially in urban areas. Higher discrimination levels help reduce the number of junk targets.

Target ID: Utilize the target ID feature to get feedback on the type of metal detected, aiding in decision-making on whether to dig.

Audio Tones

Adjust Volume and Tones: Customize audio settings to differentiate between target types based on sound. This feature helps in identifying valuable targets without relying solely on visual feedback.

Situational Setups

Beach Detecting

1. Mode: Use the All Metals mode for maximum sensitivity to various metals.
2. Sensitivity: Set to high but be prepared to lower it in heavily mineralized areas.
3. Ground Balance: Manual adjustment may be necessary if the sand is highly mineralized.

Park or Urban Areas

1. Mode: Coin Mode is ideal for detecting coins and jewelry.
2. Sensitivity: Moderate sensitivity to avoid false signals from trash.
3. Discrimination: Set to filter out aluminum and iron for a more focused search.

Relic Hunting

1. Mode: Treasure Mode works best for finding relics and historical artifacts.
2. Sensitivity: Increase sensitivity to pick up smaller or deeper targets.
3. Ground Balance: Manual adjustment can help in varying soil conditions.

Gold Prospecting

• Mode: Use All Metals mode for detecting small gold nuggets.
• Sensitivity: Set to high for maximum detection capability.
• Ground Balance: Manual adjustment is crucial in mineralized soils.

Conclusion

The Minelab Safari is a versatile metal detector that can be effectively set up for different situations by adjusting search modes, sensitivity, ground balance, and discrimination settings. By tailoring these features to the specific environment and target types, users can enhance their detecting experience and increase their chances of finding valuable treasures. Whether at the beach, in parks, or relic hunting, the Safari provides the flexibility needed for successful metal detecting.